Pneumatic Marine Fender also known as Yokohama fender or Marine fender, it is often installed on the terminal
Or ship, which aims to absorb or reduce the collision energy between ship and ship or ship and dock. This kind of
Product can protect the ship or dock from the damage of collision.
Pneumatic Rubber Fender (Yokohama Rubber Fender) produced by Xincheng is used very commonly in
The world areas. Compared with Foam Filled Rubber Fender, Pneumatic Rubber Fender owns some advantages
Include energy absorption, less reaction, compression deformation, easy floating and installation etc.
Pneumatic Rubber Fender can used in many different occasions, like between ship to ship, ship to dock etc.
The basic structure of Pneumatic Rubber Fender:
1. The outer rubber
Outside on the ball of rubber layer, which is used to protect by skeleton material and lining rubber ball from
External force damage or wear.
2...The inner rubber
On the ball inside the rubber layer, which is used to prevent gas leakage and stay on the ball pressure.
3. Cord fabric layer
Composed of hanging plastic cord fabric, the lacquer that bake frame materials
4. Volume line ring
Placed in by ball end (or both) of steel ring, for fixed end cord fabric layer
5. The end of the flange
On the ball at the ends of the metal parts, can be installed charging valve and relief valve.
Or ship, which aims to absorb or reduce the collision energy between ship and ship or ship and dock. This kind of
Product can protect the ship or dock from the damage of collision.
Pneumatic Rubber Fender (Yokohama Rubber Fender) produced by Xincheng is used very commonly in
The world areas. Compared with Foam Filled Rubber Fender, Pneumatic Rubber Fender owns some advantages
Include energy absorption, less reaction, compression deformation, easy floating and installation etc.
Pneumatic Rubber Fender can used in many different occasions, like between ship to ship, ship to dock etc.
The basic structure of Pneumatic Rubber Fender:
1. The outer rubber
Outside on the ball of rubber layer, which is used to protect by skeleton material and lining rubber ball from
External force damage or wear.
2...The inner rubber
On the ball inside the rubber layer, which is used to prevent gas leakage and stay on the ball pressure.
3. Cord fabric layer
Composed of hanging plastic cord fabric, the lacquer that bake frame materials
4. Volume line ring
Placed in by ball end (or both) of steel ring, for fixed end cord fabric layer
5. The end of the flange
On the ball at the ends of the metal parts, can be installed charging valve and relief valve.
|
||||
Name : Floating pneumatic rubber fender |
||||
Test item---specification | ||||
No |
Test item |
specification |
Technical requirements |
|
Out rubber |
Inner rubber |
|||
1 |
Stretching strength / Mpa |
GB/T 528 |
>23 |
>15 |
2 |
Biggest elongation / % |
GB/T 528 |
>410 |
>410 |
3 |
Hardness / HA |
GB/T531 |
70 |
60 |
4 |
Tear resistance / (N/cm) |
GB/T529 |
>410 |
|
5 |
Permanent compression set / % (70'C , 22h ) |
GB/T7759 |
<40 |
|
71'C after 96h hot – air |
||||
6 |
Stretching strength retention rate |
GB/T3512 |
>85 |
>95 |
7 |
Biggest elongation / % retention rate |
GB/T3512 |
>95 |
>95 |
8 |
Hardness / HA |
GB/T531 |
<10 |
<10 |
40'C , after 96h static state ozone |
||||
9 |
20% Stretching |
GB/T7762 |
No cracking |
|
Certificate CCS IOS9001:2000 CCC |
||||
Yokohanma Rubber Fender Permited CCS DNV LR |