UHMWPE anticorrosive sliding floating dock bumper, marine fender pad

UHMWPE anti-corrosion sliding Floating Dock Bumper, marine fender pads Fender panels distribute reaction forces to provide low hull pressures and cope with large tidal variations. They can also be designed to resist line loads from belted ships, or even point loads in special cases. Optional lead-in bevels reduce the snaggi

Featured Products

UHMWPE anti-corrosion sliding Floating Dock Bumper, marine fender pads
UHMWPE Anti-Corrosion Sliding Floating Dock Bumper, Marine Fender Pads
 
Fender panels distribute reaction forces to provide low hull pressures and cope with large tidal variations. They can also be designed to resist line loads from belted ships, or even point loads in special cases. Optional lead-in bevels reduce the snagging risk, whilst brackets (where required) provide highly secure connection points for chains. Closed box designs are used almost exclusively - all fully sealed, and pressure checked. Corrosion protection is provided by high durability C5M class paint systems to ISO9001, and additional corrosion allowances can be designed where required.

FEATURES & OPTIONS
Closed box steel structure
Internal structural members
Blind boss fender connections
Pressure tested for water tightness
C5M modified epoxy paint*
UHMWPE Anti-Corrosion Sliding Floating Dock Bumper, Marine Fender Pads


*OTHER OPTIONS AVAILABLE
Polyurethane topcoat (RAL5005 blue)
†Alternative colours on request
Studs for UHMW-PE face pads
Chain brackets
Lifting points
Lead-in bevels and chamfers
Specification & Design


PANEL SPECIFICATIONS AND DESIGNS SHOULD CONSIDER: 
  1. Hull pressures and tidal range
  2. Lead-in bevels and chamfers
  3. Bending moment and shear
  4. Local buckling
  5. Limit state load factors
  6. Steel grade
  7. Permissible stresses
  8. Weld sizes and types
  9. Pressure test method
  10. Rubber fender connections
  11. UHMW-PE attachment
  12. Chain connections
  13. Lifting points
  14. Paint systems
  15. Corrosion allowance
  16. Maintenance and service life
    UHMWPE Anti-Corrosion Sliding Floating Dock Bumper, Marine Fender Pads
     
ADVANTAGES 
  1. --Highest abrasion resistance of any polymer, 6 times more wear resistant than steel
  2. --Anti-Weather & Anti-Aging
  3. --Self-lubricating, Very low coefficient of friction
  4. --Excellent chemical & corrosion resistant
  5. --superior impact resistant, Noise- absorption, Vibration-absorption 
  6. --High tensile Strength
  7. --Non-Toxic and smell
  8. --UV resistance and ozone
  9. --Flame Retardant; Relatively low in water absorption
  10. --Excellent electrical properties
  11. --Good performance in resisting environment stress crack, 200 times of ordinary PE
  12. --No adhesion  
  13. --Light weight and easier to handle and fix
  14. --Cost efficient; Resulting in low energy consumption
  15. --Does not rot, split or crack; 100% recyclable 
  16. --Great liner material for industrial material handling applications
  17. --Easy Reprocessed  plastic ground protection mat 
  18. Creats an instant roadway over virtually any type of terrain - mud, sand, marshy, uneven or soft terrain 
  19. - Extremely durable to withstand vehicle weights up to 80 tons
  20. - Tested in extremes of hot and cold climate
UHMWPE Anti-Corrosion Sliding Floating Dock Bumper, Marine Fender Pads
APPLICATIONS
  1. Fender panel (frame) face pads
  2. Rubbing strips
  3. V-fender shields
  4. Lock entrance and wall protection
  5. Bridge buttress protection
  6. Beltings on workboats
    UHMWPE Anti-Corrosion Sliding Floating Dock Bumper, Marine Fender Pads

    UHMWPE Anti-Corrosion Sliding Floating Dock Bumper, Marine Fender Pads
    UHMWPE Anti-Corrosion Sliding Floating Dock Bumper, Marine Fender Pads
     
  1. Property
  1. Test Method
  1. Results
  1. Density
  1. DIN 53479
  1. 930~950 kg /m3
  1. Molecular weight
  1. Light diffusion method
  1. ~4000000 g/mol
  1. Friction coefficient
  1. DIN53375
  1. ~0.2
  1. Yield strength
  1. DIN53455
  1. ≥20N/mm2
  1. Elongation at break
  1. DIN53455
  1. ≥200%
  1. Ball indentation hardness
  1. DIN53456
  1. ≥ 30N/mm2
  1. Shore hardness
  1. DIN53505
  1. 61~70 shore D
Related products:
UHMWPE Anti-Corrosion Sliding Floating Dock Bumper, Marine Fender PadsUHMWPE Anti-Corrosion Sliding Floating Dock Bumper, Marine Fender Pads


Contact information:


 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours