Sunhelm Terminator Pneumatic Fender - ISO17357
Pneumatic Rubber Fender
Sunhelm "Terminator" Type
Pneumatic Rubber Fender CTNThe reason named Sunhelm Pneumatic Rubber Fender as "Terminator",because of his High Performance in
protective,Various performance indicators beyond International Standard ISO17357.Protect Ship Safety Fully.
Burst pressure factor highest could reach 5 times Than international standard.
It is an ideal protection tool for piers,as well as protection between ships.
It uses compressed air as a buffer medium to absorb the impact energy of the ship. Therefore,
compared with the general compression rubber protective wall, it has large energy absorption,
small reaction force, large contact area with the ship, and small unit surface pressure acting on the ship.
When tilted and compressed, the performance is not reduced, and the advantages of installation and replacement.
It can be adapted to the docking of ships in all directions.
1. Offshore platform
2. Oil and gas tankers
3. Fast ferries and aluminium vessels
4. In ports with extreme tidal variations
5. Fishing vessel, transport ship and ocean trawler
Feature and Benefit
1.Match but Beyond International Standard ISO17357
2.Highest Burst Pressue could Reach 5 times than international standard
3.Lower transportation cost,Fender transporte can be folded.Saving 2/3 of transportation cost
4.Easy to maintain
5.Adapt to various harsh environments
6.Natural rubber Used
7.D2/D3 High Strength Tyre Cord Layers
8.Warranty period 24 Months
9.Test Compression over 3000 Times
10.Self-patented safety valve
11.Inflate fast
Structure
1.Outer Rubber
Cover outside on the ball of rubber layer, which is used to protect skeleton material and inner rubber
ball from damage of external force.
2. Synthetic cord reinforced rubber layer
Reinforced cord rubber layer is composed of winding synthetic cord layer, it is mainly used for maintain
the internal air pressure.
3. Inner Rubber
On the ball inside the rubber layer, which is used to prevent air leakage and control the ball pressure.
4. End Flange
The metal parts at both ends of fender, which can be fitted with charging valve and safetyvalve.
Chain and Tire net for better hull protection
chain and tire net used to avoid any damage to fenders and ship hull
Towing ring and swivek
fenders are fitted with a towing ring and swivel in galvanized steel.
Optional:Stainless steel available.
ISO17357 Complied
our fenders comply and beyond requirements of ISO17357,ensuring good performance
and high quality floating pneumatic fender for safe berthing operations.
Internal Initial Pressure
Standard:50KPa and 80KPa
SunHelm-Pneumatic Fender Specification
Nominal size | INTERNAL PRESSURE 0.08Mpa at 60% deflection | Safety-valve pressure setting | Testing pressure | |||
Diameter | Length | Energy absorption | Reacion force | Hull pressure | ||
mm | mm | kN·m | kN | kPa | kPa | kPa |
500 | 1000 | 8 | 85 | 174 | - | 250 |
600 | 1000 | 11 | 98 | 166 | - | 250 |
700 | 1500 | 24 | 180 | 177 | - | 250 |
1000 | 1500 | 45 | 239 | 160 | - | 250 |
1000 | 2000 | 63 | 338 | 174 | - | 250 |
1200 | 2000 | 88 | 390 | 166 | - | 250 |
1350 | 2500 | 142 | 561 | 170 | - | 250 |
1500 | 3000 | 214 | 761 | 174 | - | 250 |
1700 | 3000 | 287 | 840 | 168 | - | 250 |
2000 | 3500 | 430 | 1150 | 168 | - | 250 |
2500 | 4000 | 925 | 1815 | 180 | 230 | 300 |
2500 | 5500 | 1317 | 2653 | 195 | 230 | 300 |
3000 | 6000 | 1890 | 2906 | 196 | 230 | 300 |
3300 | 4500 | 1640 | 2476 | 171 | 230 | 300 |
3300 | 6500 | 2532 | 3961 | 191 | 230 | 300 |
3300 | 10600 | 4281 | 6907 | 208 | 230 | 300 |
4500 | 9000 | 6633 | 7551 | 192 | 230 | 300 |
4500 | 12000 | 9037 | 10490 | 202 | 230 | 300 |
Nominal size | INTERNAL PRESSURE 0.05Mpa at 60% deflection | Safety-valve pressure setting | Testing pressure | |||
Diameter | Length | Energy absorption | Reacion force | Hull pressure | ||
mm | mm | kN·m | kN | kPa | kPa | kPa |
500 | 1000 | 6 | 64 | 132 | - | 200 |
600 | 1000 | 8 | 74 | 126 | - | 200 |
700 | 1500 | 17 | 137 | 135 | - | 200 |
1000 | 1500 | 32 | 182 | 122 | - | 200 |
1000 | 2000 | 45 | 257 | 132 | - | 200 |
1200 | 2000 | 63 | 297 | 126 | - | 200 |
1350 | 2500 | 102 | 427 | 130 | - | 200 |
1500 | 3000 | 153 | 579 | 132 | - | 200 |
1700 | 3000 | 191 | 639 | 128 | - | 200 |
2000 | 3500 | 308 | 875 | 128 | - | 200 |
2500 | 4000 | 663 | 1381 | 137 | 175 | 250 |
2500 | 5500 | 943 | 2019 | 148 | 175 | 250 |
3000 | 6000 | 1309 | 2387 | 148 | 175 | 250 |
3300 | 4500 | 1175 | 1884 | 130 | 175 | 250 |
3300 | 6500 | 1814 | 3015 | 146 | 175 | 250 |
3300 | 10600 | 3067 | 5257 | 158 | 175 | 250 |
4500 | 9000 | 4752 | 5747 | 146 | 175 | 250 |
4500 | 12000 | 6473 | 7984 | 154 | 175 | 250 |
Company Overview
SunHelm Marine as a comprehensive enterprise specializes in manufacturing pneumatic rubber fender,foam fender, ship airbag,FRP pipe and many kinds of ship and dock products design,R&D, production and sales. With many years development,SunHelm marine has become a well known key company, which earned good reputation all over the world. We insist customers requirement first since founded,supply the most professional solution to meet customer's personalized requirements.
SunHelmMarine pay great attention to quality control, high reliability is our design principle, quality control starts from beginning, high quality parts,advanced technology and equipment are used, products are designed,manufactured and tested as ISO 9001:2015 requirements. All procedures are strictly controlled and completely meet requirements of ship surveyors such as CCS, BV, RS, ABS, LR, etc.
With alomost 20 years development SunHelm has extended its business to America,Italy,Russia,Philippines,India etc. more than 70 countries and areas,for it's top quality, good sales after service and great reputation.Products are widely used in port, ocean project,ship building, installation under water,salvage buoyancy aid and tunnel project etc. getting wide good evaluation from customers. We have won a place in this industry in domestic and international market.